DR Power Equipment

Gasoline lawn mowers require regular oil changes similar to motorcycles, cars, and other mechanical devices. The engines produce soot, due to which the oil gets dirty over time. You will need to replace the mower oil regularly to ensure that it continues to function without a problem.

All Huntsville outdoor power equipment that runs on gasoline requires a regular change of oil. You need to change the oil to avoid engine damage. In this blog, we will walk you through the steps required in changing the lawn mower oil.

Step 1: Gather the Right Tools

You need to gather the appropriate equipment required to change the engine oil. Some of the recommended tools you should have to change the engine oil include the following.

  • Socket wrench
  • Pan for collecting oil
  • Gloves
  • Plastic sheet
  • Clean cloth
  • Engine oil

The above will be enough to change the oil without making a mess. Make sure that you buy the engine oil that is recommended by the manufacturers, otherwise it will end up damaging the engine.

Step 2: Select the Right Place

The next step is to select a work place for changing the oil. You should select a place where the engine oil spill won’t damage the floor. You should never replace the engine oil on the lawn as it will harm the plants.

Recommended places for changing the engine oil include the garage, concrete patio, and driveway.

Once you have selected the area, you should place plastic sheets on the floor. Additionally, you should place a pan over the sheets. This will reduce spills on the floor when you drain the engine oil.

Step 3: Warm Up the Engine

Consider leaving the mower running for about 10 minutes to warmup the engine. Warming up the engine will help make the engine oil lighter, making it easier for the engine oil to drain out.

Once the engine feels hot enough, you can turn off the engine, and proceed to the next step.

Step 4: Drain the Fuel

You should now drain the existing oil from the tank. You don’t have to drain the oil completely. But you must get rid of about 90 percent of the fuel.

With the pan under the mower, open the drain cap. The cap can be removed using a 3/8 inch socket wrench. In mowers where the drain cap is located inside the body, you will have to use an extension to loosen the cap. Some mowers come with a handle. You won’t have to use the wrench as the drain cap can be loosened with hand.

You will have to tip the mower to the side to drain the oil. The oil should start collecting on the pan on the floor. Leave the mower in a tilted position for about a minute.

Step 5: Fill the Oil

The last step is to refill the engine oil. After the oil has drained, you should reinstall and tighten the drain plug. Next, you should place the mower on a level surface, and add the oil from the can.

Check the oil once the engine is filled. Make sure that the amount recommended in the owner’s manual for engine oil has been added. Not filling it to the recommended level will prevent proper operation of the engine.

Once the engine oil is filled, and you have fixed the drainpipe, you should try starting the mower. Close the mower after a few minutes, and remove the plastic sheets from under the mower.

While oil changes are a part of regular maintenance for heavy equipment its necessary for all out there to get reliable equipment in the first place. To get help with maintenance and get top of the line equipment head on over to a reliable distributor near you. DR Power Store is a trusted Huntsville outdoor power equipment rentals and sales dealer. We are one of the premier DR mower parts dealers in Alabama. We have been serving the residents of Alabama for over 30 years.